Lights
The Light Fitting EZSVP13 is determined to illuminate the face of deep mines and is mounted on reinforcements through 4 mounting holes. The luminaire is designed as a group I M2 device.
The product meets the technical requirements for equipment intended for environments with a risk of explosion in accordance with Directive 2014/34 / EU (NV 116/2016 Coll.). The product also meets the technical requirements of standards according to current requirements and regulations of the country where the equipment is certified.

Basic technical parameters: |
|
Nominal voltage |
90-264V, 50/60Hz |
Nominal input power |
max. 35W |
Source of white light |
14 pcs LED diode |
Flux |
min. 3900 lm |
Source of red light |
8 pcs LED diode |
Flux |
min. 1300 lm |
The Light Fitting EZSVP13 contains from 8 pieces of red LEDs with its own power supply and electrical relay that switches the supply voltage sources for white or red LEDs (maybe lit either white or red LEDs). |
The Light Fitting SVN8 is determined to illuminate the working face of underground mines. The light fitting can be used in all mine premises with danger of explosion of methane.
The product complies with technical requirements for devices determined for use in potentially explosive atmospheres of mines according to Directive 2014/34/EU.
The product also complies with technical requirements EN 60079‐0 and EN 60079‐1.

Basic technical parameters: |
|
Nominal voltage |
90-240V, 50/60Hz |
Nominal input power |
max. 24W |
Flux |
min. 3800lm |
Luminous efficacy |
≥ 160lm/W |
Viewing angle |
122⁰ |
The Light EZSVR1 for Shearer Loader is intended for lighting in deep mines, for example in excavating combines.
The lights is designed as a group device of category M2.
The product meets the technical requirements for equipment intended for environments with a risk of explosion in accordance with Directive 2014/34 / EU (NV 116/2016 Coll.). The product also meets the technical requirements of standards according to current requirements and regulations of the country where the device is certified.

Basic technical parameters: |
|
Nominal voltage |
90-264V, 50/60Hz |
Nominal input power |
max. 15W |
Source of white light |
3x LED 12W |
Flux |
min. 650lm |
Source of red light |
3x LED 1W |
Flux |
min. 100lm |
Both red and white LEDs have a separate power supply. The red LEDs light up immediately when the supply voltage is applied and the white LEDs can be switched on and off with a switch. |
The SVV2 warning light with LEDs is used in explosive environments wherever it is necessary to signal danger. An electronic circuit is encapsulated in the metal part, which supplies the LED diodes, which are located in a transparent plastic cover. The entire luminaire is protected against mechanical damage by a steel grille, which also serves to hold the luminaire. The power cord is protected by a rubber hose.
The product meets the technical requirements for equipment intended for environments with a risk of explosion in accordance with Directive 2014/34 / EU (NV 116/2016 Coll.). The product also meets the technical requirements of standards according to current requirements and regulations of the country where the device is certified.

Basic technical parameters: |
|
Nominal voltage |
By type, 10-70VDC / 230VAC |
Nominal input power |
3VA |
Dimensions |
170x126x118mm |
Weight |
1,6kg |
Color of plastic cover |
red, green, yellow |